Sentence examples for residual bonds from inspiring English sources

As mentioned earlier, the solution-processed methods consist of several sequential or combined steps including a possible chemical reaction step, such as sol gel, a film deposition step, such as spin coating, and post-heat treatment to remove residual bonds and volatiles.

For small stirrups spacing, Yasojima and Kanakubo's solution gives higher peak and residual bond stresses.

Then, a strange increase of residual bond occurs in the model of Yasojima and Kanakubo.

At 350 °C, the residual bond strength was 12.20 23.14% of their original values.

Experimental results indicated that residual bond strength between reinforcing bar and concrete decreases with increasing temperature.

For residual bond strength, pullout specimens are heated under various sustained load values.

The residual compressive strength is in tendency with the residual bond strength of S420a and S500a whereas the residual flexural strength corresponds agrees with the residual bond strength of S220a.

The failure modes, residual bond strength and residual bond stiffness of such specimens were compared with those of control specimens, to facilitate the investigation of the effect of fatigue loading on the bond behaviour.

Use of CFRP at smaller sheet bond area imparted better residual bond strength with NWAC than with LWAC of similar strength grade, and subjected to similar elevated temperatures.

The effects of stirrup corrosion on crack opening, maximum bond stress, effective bond stiffness, unloading stiffness, energy dissipation, frictional bond resistance and residual bond stress were discussed in detail.

Cubes were cast to measure the residual compressive strength of the various mixes and specimens reinforced with a single bar were prepared, to study the residual bond properties.