Sentence examples for reservoir I from inspiring English sources

The simulations predict a two-stage evolution of the cement porous matrix, after interaction with acid fluids from reservoir: (i) a first, "clogging" stage, characterized by a decrease in porosity due to calcite precipitation, and (ii) a second stage of porosity reopening, related to the disappearance of primary cement phases, and the re-dissolution of secondary minerals, such as zeolites.

(a) Makarem 1 gas reservoir; (b) Verkhne Vilyuchanka oil and gas reservoir; (c) Jingbian gas reservoir; (d) Yurubcheno Tokhomo oil and gas reservoir; (e) Niagaran Reef Trend oil and gas reservoir; (f) Lima–Indiana Trend oil and gas reservoir; (g) Kuyumba oil and gas reservoir; (h) Anyue gas reservoir; (i) Tahe oil and gas reservoir.

Major breaches occurred in the embankment separating two compartments of the reservoir (i.e., the partition embankment) approximately one year after the filling of one of the reservoirs.

The IPR curve is usually a pseudo-steady-state representation of the deliverability of the formation at a given depletion state of the reservoir (i.e., reservoir pressure).

The viscosity of a chemically modified injector fluid measured in a rheometer is a poor indicator of behaviour in the reservoir i.e. pressure driven permeable flow.

Synergistic gains of optimal joint operation are analyzed based on three scenarios: (1) neither reservoir participates in flow regulation; (2) one reservoir (i.e., Liujiaxia) participates in flow regulation; and (3) both reservoirs participate in flow regulation.

According to the mass conservation law, the total flow into the horizontal well is defined by the sum of the reservoir i-th node flows: Q_{text{tot}} = mathop sum limits_{i = 1}^{n} Q_{left( i right)} (5).

Polymer flooding is gaining interest for heavy crude oil reservoirs (i.e., Canada) and offshore fields.

This research was commenced to enhance flood management via improving the operation rules of multi-purpose reservoirs (i.e. Aswan High Dam Reservoir "AHDR").

However, the development of the highest-quality reservoirs, i.e., medium porosity and medium permeability, is limited.

Thus, it is concluded that the application of CWI to virgin light oil reservoirs, i.e., secondary CWI, is more efficient compared to CWI applied to the reservoir after WF, i.e., tertiary CWI.