Sentence examples for required removal efficiencies from inspiring English sources

In practice however, the required removal efficiencies for these pollutants are not always obtained, indicating the need of process optimisation in terms of process design and/or operation.

TSS EMCs are needed to estimate the minimum required removal efficiency of the RDTS needed in order to improve highway runoff quality to meet applicable standards and MDUALs are needed to calculate the minimum required capacity of the RDTS to ensure performance longevity.

The problem required removal of the device ahead of schedule.

One patient required removal of ectopic bone.

Below ground, the contractors found an oil tank requiring removal.

Ohio state law requires removal of asbestos by special contractors.

The monopolar electrodes requires long run times and does not provide high removal efficiencies, therefore, the bipolar electrode configuration was preferred in this study.

Removal efficiencies of nitrogen, phosphorus, coliform, and biological oxygen demand were measured.

In the low initial arsenate concentrations, the highest arsenate removal efficiency was required high ferric chloride and ferric sulfate dose of 50 and 40 mg L−1, while in the high initial arsenate concentrations, the highest arsenate removal efficiency was provided at low ferric chloride and ferric sulfate dose of 37 and 32 mg L−1, respectively.

SRP and TP presented low removal efficiencies.

In both CWs, removal efficiencies were satisfactory.