Sentence examples for required pressure in from inspiring English sources

The process includes a sub cycle in which the vapor refrigerant is separated in the separator to be fed to the second stage compressor and the liquid refrigerant leaving the separator is throttled to the required pressure in the second valve and then mixed with the return MR (Mixed refrigerant) stream before entering the precooler.

Collisional cooling was achieved through adjustment of the source rotary pump isolation valve to give the required pressure in the source and transfer hexapole regions.

This increase in the pressure drop due to the viscosity buildup will divert the fresh fluid flow to the low-permeability core (15 md) because the required pressure drop in this case will be 32 psi.

As soon as this reaction occurred, the required pressure was indicated in grams, and this value was considered to be the individual paw withdrawal threshold (PWT) value.

The "required" pressure curve is calculated in a similar manner, the rate of the pipeline is arbitrarily fixed, and then counter-current pressure drop calculations are performed from the separator to the junction.

This increase in required pressure can easily be simulated by increasing the amount of weight for any given units.

This was revealed by an increase in required pressure support, which ranged from means of 12.8 cm H2O with HHs, 14.8 cm H2O with HMEs without filter, and 17.6 cm H2O with HMEFs [ 74].

BR2 (particle size of 0 6 mm) was prepared by pyrolysis processing at 450 °C with a heating rate of 15 °C/min for 1 h in a tubular-furnace with 0.35 Pa vacuum system under N2 atmosphere, and the required pressure was less than 0.5 Pa in experimental processing.

This means that adequate CO2 pressure can be applied to prevent foam-causing gas bubbles from forming in the beer line, and the required pressure will not produce overly foamy beer.

A novel device developed to lessen the required pressure for starting up flows of gelled fluid was investigated in the current work.

Briefly, the membrane was assembled in the flow cell, and the nitrogen provided the required pressure to drive the liquid through the membrane.