Sentence examples for representation of the device from inspiring English sources

The graphical representation of the device can be seen in Fig. 1.

Figure 1 Schematic representation of the device used in the simultaneous off-normal coating of the two micro-cantilevers.

An accurate representation of the device in SPICE has been developed using the commercially available TOM3 model.

Figure 1 shows the schematic representation of the device for I V measurement, where the BaWO4 film with thickness of ~2 μm was spin coated on the FTO substrate, and the electrodes of Ag with the area of less than 1 mm2 and thickness of 200 nm were deposited onto the BaWO4 film.

Figure 1A shows a schematic representation of the device.

The recording process was a deliberate exaggeration of the techniques used by the Beatles in the early 1960s, with a four-track representation of the devices.

This work presents the overall system architecture, the necessary subsystems and the various models in the virtual representations of the devices and products for a sufficient description of the conditions of entire robot cell to reach the before mentioned goals.

Fig. 7 Schematic representation of the microfluidic device with a cell trapping region.

A schematic representation of the SAW device is shown in Fig. 1.

The model divides a 2D representation of the release device into an array of cells.

Open image in new window Fig. 1 Schematic representation of the SAW device which was used for the deposition of electrospun P VDF TrFE /ZnO nanocomposites.