Sentence examples for removed with increasing from inspiring English sources

However, 2-butanone is removed with increasing efficiency by increasing amounts of CR20C in the filter suggesting a low level of chemisorption by CR20C for this ketone.

Although increasing the etching time results in nanostructures having low average reflectance, it destroys the formed nanostructures because the Ag nanoparticles which act as the etch mask are completely removed with increasing etching time.

The lignin fraction was gradually removed with increasing NaOH concentrations, reaching 11.1% for HGU and 14.3% for EG, under the harshest pretreatment conditions.

Figure  2 shows more clearly that lime pretreatment affected mainly the lignin fraction, which was gradually removed with increasing pretreatment time, reaching 30%% of solubilization after 60 min, while no lignin solubilization occurred in hydrothermal treatment.

However, a well-defined peak around 1030 cm-1 with a high intensity at around 1030 cm-1, which is also attributed to guaiacyl moieties, was detected and gradually removed with increasing NaOH concentrations [ 32].

This defect is removed with the increasing of the number of Jacobi functions which is obvious according to Figures 1 and 2. On the other hand, taking into account Figures 4 and 5.

Although it was a small retrospective study, Roman et al. found an increase in the volume of ovarian tissue removed with an increase in cyst diameter [ 49].

This is due to the fact that the extra-framework and a part of framework aluminum can substantially be removed with the increase of treatment time.

The excess stain was removed by washing with increasing concentrations of ethanol (70%, 95 %, 100, 15 minutes each), and then the slides were placed in xylene solutions for at least 2 days until the fats were sufficiently cleared from the gland.

The amount of Ni removed increased with an increase in flow rate, but decreased with an increase in the amount of chitosan loading, indicating that for the adsorption takes place mainly on the surface of chitosan film which, in turn, is controlled by surface area of the membrane.

After 30 min of reaction time, at pH 10 around 77 % of color was removed with FeCl3 and it increased with increase in FeCl3 dosage to approximately 80%% (with 3 g/l).