Sentence examples for removed maximum from inspiring English sources

Hence, SH coefficients with values larger than the physically acceptable values were removed (maximum values of the induced/inducing = β/α ratio are 0.5 for l=1, 0.66 for l=2, and 0.75 for l=3 for perfect conductive body).

It has also been found that Cu II) can be removed maximum about 87.99 and 99.15 % with initial Cu II) concentration of 10 and 25 mg/L for dried and carbonized algae, respectively, at an adsorbent dose of 10 g/L in 20 min of contact time and at optimum pH 6 in both the cases.

STAR was run with the following parameters: minimum/maximum intron size set to 30 and 500,000, respectively, noncanonical, unannotated junctions were removed, maximum tolerated mismatches was set to 10, and the outSAMstrandField intronMotif option was enabled.

Three stages are involved in polishing, namely, 1. a roughing stage to remove maximum material without imparting any damage to the surface, 2. an intermediate stage of semi-finishing to control the size and improve sphericity, and 3. a final finishing stage to obtain best surface finish and sphericity while maintaining the final diameter.

Batch experiments demonstrated that a 2 gm adsorbent dosage is capable of removing maximum amount of atrazine from aqueous solution.

It indicated that though favorable adsorption takes place at pH 4.3 8, optimum pH would be 4.7 for MITDC to remove maximum Cd II).

And some leading players are reportedly pushing to remove maximum salary contracts to better reflect their value to the franchises.

Debridement is ideally performed selectively, removing maximum amounts of dead tissue but minimizing damage to healthy tissue.

For example, the defense of A. thaliana to wounding is stronger than to Pieris rapae damage [ 10], because P. rapae can reduce tissue crushing and minimize cut leaf edges while removing maximum tissue mass.

The foci locations were identified using the ImageJ "Find Maxima" function with a simple filtering step to remove maxima that were too large to be foci (>40 total pixel area).

If the inefficiency of the motor is removed the maximum COP is 2.2, and, when the magnet drive losses are excluded, the maximum COP becomes 10.