Sentence examples for removal temperature from inspiring English sources

Adsorbed atomic nitrogen (315 cm−1) reacted only to form N2 during reduction with CO, adjudged by its removal temperature (325°C) and the absence of N2O formation.

The vertical tubular photobioreactor consists of seven vertical loops of 80 m each connected by a manifold to a bubble column used for oxygen removal, temperature control, nutrient and antifoam addition.

The horizontal tubular photobioreactor consists of three loops of 80 m each (Fig.  4) connected via a manifold to a bubble column used for oxygen removal, temperature control, nutrient and antifoam addition (Silicone RE20 Snapsil, BRB international, The Netherlands).

Litter removal increased temperature and reduced humidity on the ground and vegetation removal increased canopy openness.

HRT had less impact on microbial removal than temperature and thus further investigation of removal under lower HRTs is warranted.

Experiments were conducted to demonstrate the ability of the dehumidifier and cooler to achieve sufficient moisture removal and temperature reduction.

The experimental results were used to develop a series of equations describing the relationship between ammonia removals and operating conditions (initial ammonia removal rate, temperature, concentrations of ammonia and suspended solids in influent).

The surface treatment of steel also begins during hot-rolling, because reheating conditions, in-line scale removal, rolling temperature, and cooling rate all determine the type and thickness of scale formed on the product, and this affects atmospheric corrosion, paintability, and subsequent scale-removal operations.

The process of purification by selective fermentation of raw GOS at 20% (w/w) was optimised in terms of the specific productivity of unwanted carbohydrate removal, considering temperature, pH and RCC as operational variables.

All four factors were found to significantly (p < 0.05) affect oxygen state and carbon removal, but temperature (5 °C vs 15 °C) and initial carbon concentration (80 vs 240 mg/l) were found to be the most important factors.

In fixed-bed reactors, due to the exothermicity of the oxidation reactions, heat removal and temperature control are critical in achieving safe and optimum reaction conditions that maximize conversion and selectivity.