Sentence examples for removal of drill from inspiring English sources

Companies do have to put up bonds, but they cover only the removal of drill pads and water impoundment ponds -- not the removal of roads and other scars.

Lift forces acting on fluidized particles play a central role in many important applications such as the removal of drill cuttings in horizontal drill holes, sand transport in fractured reservoirs, and sediment transport.

Removal of the drill and the guide.

The proposed causes vary from misplacement of the entry point to forceful removal of a drill jammed into the femoral shaft [1].

Removal of the drill would lower the pressure beneath it, drawing water into the hole to be left to freeze, creating a plug of ice in the bottom of the hole.

Regarding this, effect of different parameters including extraction temperature (313 338 K) and pressure (100 200 bar), flow rate of CO2 (0.05–0.36 cm3/s) and static time (20 130 min) on the removal of contaminations from drilling mud was examined using the design of experiment of changing one factor at a time.

Thirty eyes were treated as follows: the corneal samples were taken by removal of the cornea by using drill Surgistar 7.50 mm without vacuum (Trephine Drill Bits), in order to reduce the trauma of sampling and one specimen of approximately 1 cm of conjunctiva and one specimen of 1 cm of cornea were collected.

In the solids control system, the removal of fine solids from drilling fluid is performed by decanter centrifuges.

This is a new method which can be used to assess the rate of removal of cuttings during the drilling process.

In addition, to examine the effect of the supercritical extraction on the crystalline structure modification and removal contaminations X-ray diffraction (XRD) and scanning electron microscopy (SEM) analyses were performed which confirmed the successful removal of contaminations from the drilling mud without significant crystalline modification.

During the process of recirculating drilling fluids, the removal of useless solids, especially submicron particles, in drilling fluids is the most problematic issue in drilling operations.