Sentence examples for remaining laminates from inspiring English sources
The cracks grow simultaneously in all the aluminum layers of some laminates (case I), while in only one external aluminum layer of the remaining laminates (case II).
The cracks were found to grow simultaneously in all three aluminum alloy layers of some laminates (case I, Figure 4a), whereas in only one external aluminum alloy layer of the remaining laminates (case II, Figure 4b).
The sustained structural load performance of strengthened bridges depends on the carbon fiber-reinforced polymer (CFRP) laminates remaining 100%% bonded to concrete bridge members.
A multiple damage-mode model for the estimation of the strain energy release rate and the remaining stiffness of damaged laminates constitutes the core of the particle filtering algorithm, thus allowing the prognostic framework to extend for monitoring of simultaneous, coexisting damages.
The volume ratio of both material constituents is kept constant, so that the residual stresses in the different laminates remain unchanged.
Three of the nine specimens were control beams with no FRP strengthening (CM1, CM2 and CC), and the remaining six beams were externally strengthened by CFRP laminates and sheets in flexure and flexure-shear, with and without anchoring of the CFRP laminates used for flexure.
The remaining beams were reinforced with a NSM CFRP laminate prestressed at 20%, 30 % and 40 of its nominal tensile strength.
Assessment of strength degradation in composite laminates, e.g. due to fatigue, is used in remaining life prediction through renowned engineering models.
The remaining 5-g subsamples were each sealed inside 0·12 × 0·09-m (length × width) laminated aluminium foil packets and then placed in an incubator at 45 °C.
The remaining terms (i.e., v (k) and w (k)) in Eq. (3), on the other hand, belong to the local deformations of laminate within the laminate and will be determined using the layerwise laminated plate theory (LWT).
The core of the sandwich is made of a Nomex Honeycomb core and the faces are laminated and remain thin.
