Sentence examples for relative bend from inspiring English sources

The toroidal vessel with larger relative bend radius requires lower coefficient of friction between the fiber bundle and the supporting surface.

The fiber slippage and bridging tendencies are outlined and compared, corresponding to various relative bend radii and hoop-to-helical thickness ratios.

The condition between the hoop-to-helical thickness ratio and the relative bend radius of the toroid is also formulated to prevent fiber bridging on the concave surface.

This effective bending stiffness depends on two non-dimensional parameters: the composite action parameter (shear connection stiffness) and the relative bending stiffness parameter.

U-bending experiments have shown that the designed sandwich plates can be bent successfully with a drastically small relative bending radius (R/H) of 3.33.

The optimal non-geodesic trajectories, corresponding to various relative bending radii, are determined in order to evaluate the effect of non-geodesics on the structural performance of toroids.

As a result an alternative approach is proposed for estimating the relative bending stiffness of masonry structures for future use with the Potts and Addenbrooke method when making simple predictions.

However, the data suggest that the reversal in direction of the cross-stream flow component compared with subaerial flows is important in determining the position and morphology of 'point bars' relative to bend apices.

Relative to bending modal shapes, the torsional ones are affected more significantly by the blood.

The values of relative density, bending strength and Vickers hardness of the third pass fibrous HAp- t-ZrO2)/Al2O3-(m-ZrO2) composites, wHAp- t-ZrO2intered at 1400 °C, were about 93%, 169 MPa, and 792 HAp- t-ZrO2ively.

However, in the annealed condition, springback does depend on the cladding orientation relative to bending and was found in all cases to be substantially lower than that observed in the as-rolled condition.