Sentence examples for reinforcement strength from inspiring English sources
Reinforcement strength should be considered in numerical modeling of reinforced soil structures when the reinforcement strength is less than the upper bound value and internal and compound stabilities are concerned.
Effects of different parameters on this normalized value of the geosynthetic reinforcement strength are also assessed.
Ignoring reinforcement strength may lead to overestimation of the stability of the structures.
All beams tested had the same geometrical dimensions but different steel reinforcement strength and ECC thickness.
It is shown that the derived relation between required reinforcement strength and consolidation time (the Time-Strength-Envelope) can be represented by a simple exponential equation.
Design charts providing the value of the required reinforcement strength and embedment length are plotted for both uniform and linearly increasing reinforcement distributions.
Numerically predicted and measured maximum reinforcement loads are compared to loads using the AASHTO reinforcement strength-based design approach (Simplified Method) and the Simplified Stiffness Method which is an empirical reinforcement stiffness-based method.
Displacement ductility of HSC columns was evaluated in terms of their concrete and reinforcement strengths, bar arrangement, volumetric ratio of transverse reinforcement, and axial loading.
Moreover, HSC columns were evaluated in terms of their concrete and reinforcement strengths, bar arrangements, tie spacing, axial load ratio, ductility, and drift ratio.
In this paper, influences of key factors, including the degree of reinforcement, concrete strength, steel yield strength, compression steel ratio, and confining pressure, are studied based on a theoretical method.
(1) Coupling beams whose shear span-to-depth ratio was 1.68 and which were connected to walls only by horizontal reinforcements, without diagonal reinforcement, showed strength that is about 1.5 times the design strength for a strut-and-tie model, thus indicating that proper design strength is possible using these construction details.
