Sentence examples for reheat cycle from inspiring English sources

The Regular Gas Reheat cycle and the Regular Gas Reheat cycle with reduced-irreversibility HRSG (the Reduced Irreversibility cycle) were compared with the Regular cycle, which is the typical design for a commercial combined cycle.

A general-purpose performance prediction program, which can simulate various types of gas turbine such as simple, recuperative, and reheat cycle engines, has been developed.

Another process improvement such as double reheat cycle, double recompression cycle and an advanced flue gas economizer configuration induce efficiency gain between 0.3 and 0.5%pt.

The Regular cycle with gas-reheat and gas-recuperation (the Regular Gas Reheat cycle) was modeled including detailed modeling of the combustion and GT cooling processes and a feasible technique to reduce the irreversibility of its HRSG was introduced.

The maximum root mean square deviations of the predicted off-design performance parameters from the reference data were 0.22% and 0.44% for the two simple cycle engines, 0.22% for the recuperative cycle engine, and 0.21% for the reheat cycle engine.

The results indicate that the Reduced Irreversibility cycle is 1.9 2.15 percentage points higher in efficiency and 3.5% higher in the total specific work than the Regular Gas Reheat cycle, which is 3.3 3.6 percentage points higher in efficiency and 22 26% higher in the total specific work than the Regular cycle.

A thermodynamic and kinetic assessment was made of secondary austenite (γ2) growth in the welding microstructure of a UNS S32304 duplex stainless steel during reheat cycles, between 900 and 1250 °C.

The resulting optimal architecture has higher efficiency than both the traditional Brayton cycle (that employs only adiabatic combustion) and a fully-reheat cycle (that employs only isothermal combustion).

This paper has as objective the optimization of a combined cycle power plant describing and comparing four different gas turbine cycles: simple cycle, intercooled cycle, reheated cycle and intercooled and reheated cycle.

It can be observed that at ~42 h, an increase in yields (Fig. 7b) was apparent, suggesting that the catalyst had been partially reactivated through the reheating cycle under the inert gas.

Compared to no-reheated cycle, single reheat is an effective configuration with 1.5%pt efficiency increases.