Sentence examples for regular dislocation from inspiring English sources

The idealised problem of a pile-up of regular dislocation walls (that is, of planes each containing an infinite number of parallel, identical and equally spaced dislocations) was presented by Roy et al. [A.

The inhibition of grain subdivision by the grain boundaries and precipitates lead to the transformation from regular dislocation configurations consisting of dislocation-cells and microbands to irregular dislocation configurations consisting of localized dislocation clusters, which further account for the decrease in ductility.

In this paper, we use the techniques of discrete-to-continuum asymptotic analysis to obtain a detailed description of a pile-up of regular edge dislocation walls.

Fifthly, existence of the regular misfit dislocation network at the interfaces.

Furthermore, the investigation revealed that dislocations are not only in the γ-phase, but regular misfit dislocations are at the γ/r inter lamellar boundary interfaces ( Sturm et al. 2010), resulting significant slips on (001) planes above the peak temperature of 800 °C ( Hayashi et al. 2001; Nakano et al. 2002b) with two types of 1/2 <110] dislocations.

Regular misfit Dislocations are increased with the coarsening of the lamellae ( Zhang et al. 2001) due to discontinuous grain boundary migration as well as continuously by fault migration ( Palm et al. 2012).

Regular misfit dislocations along the lamellar interfaces, formation of faulted dipoles of superdislocations, changes in deformation modes due to the appearance of some superstructures, domination of climb at high temperature, etc., for the Al-rich TiAl family are few of them at the smaller scales.

Such a relatively large lattice misfit can be accommodated by the introduction of a regular network of misfit dislocations at the interface [13] allowing a well-ordered cube-on-cube growth driven by the substrate along the (001) direction.

However, hip dislocations in the regular care area were originally diagnosed as completely dislocated by local clinicians, and no additional hips were deemed dislocated by the reviewer of the present study.

Symmetrical tilt boundaries spanning the low- and high-angle regimes and comprising regular arrays of grain boundary dislocations are simulated.

As described above, SGBs in Opx can be started by the regular arrangement of the (100) [001] dislocations.