Sentence examples for reflux cooler from inspiring English sources

Well defined quantity (see Table 1) of GO nanosheets was dispersed using ultrasound in water, added to the yellow precursor of titania peroxo-complex and annealed at a heated mantle in a round-bottom flask with a reflux cooler at 100°C for 48 hours.

The bioreactor was equipped with a marine impeller, an exhaust gas reflux cooler perfused with water at 5°C, a pH electrode (Mettler Toledo, Halstead, UK) and a polarographic dissolved oxygen probe (Hamilton, Bonaduz, GR, Switzerland).

The reaction mixture was heated for 15 min at reflux, cooled and CHCl3 was removed using a rotary evaporator.

In the presence of IS, 2.5 mL of 1.0 M NaOH was added to 7.5 mL stock solution, and the mixture was kept at 80 °C for 1 h under reflux, cooled and neutralized with 1.0 M NaOH to pH 7.0.

We therefore deduced that the excess iron transformed from vapor to liquid (into the FePt-hexane ink) in the reflux, cooling, and washing processes during the synthesis of the FePt nanoparticles.

In the presence of IS, 2.5 mL of 1.0 M HCl was added to 7.5 mL stock solution, and the mixture was kept at 80 °C for 1 h under reflux, cooled and neutralized with 1.0 M HCl to pH 7.0.

For analysis of the other elements, milled samples were digested with a mixture of HNO3 and HClO4 at 200 °C with reflux cooling.

Stirring continued for 1 h while keeping reflux and cooled to room temperature.

The reaction mixture was stirred for 3 h at reflux temperature, cooled down to room temperature and acidified to neutral pH with acetic acid.

In the presence of IS, 2.5 mL of 5%H2O2O2 was added to 7.5 mL stock solution, and the mixture was kept at 80 °C for 1 h under reflux then cooled, and the volume of the mixture was made up to 25 mL with ultrapure water.

Counter-current flow limitation (CCFL) experiments were performed, simulating the reflux-condenser cooling mode appearing in small break loss-of-coolant-accident (LOCA) scenarios.