Sentence examples for reflective characteristics from inspiring English sources

At the same time, due to the low absorption of both Be and Al, we can expect a unique combination of reflective characteristics: record high peak reflectivity and spectral selectivity simultaneously.

The structural and reflective characteristics of single photon energy and broadband reflective QWPs have been explored numerically.

Finally, we investigated the effect of thermal treatment on the optical properties of the new nanofibers and we revealed the possibility of tuning the reflective characteristics of the nanofibrous surfaces in function of the annealing time.

The reflective characteristics of periodic Mo/Si multilayer mirrors with different thickness ratio are analyzed and compared both in frequency domain and in time domain, for picking out optimized thickness ratio to achieve high-efficiency attosecond pulse reflection.

Unlike traditional LIDAR methods, the proposed techniques are based on measurements of the laser energy (intensity and spatial distribution) incident on target surfaces of known geometric and reflective characteristics, by means of infrared detectors and/or infrared cameras calibrated for radiance.

These improvements are mostly due to the use of a new liquid crystal material with superior reflective characteristics.

The reflective characteristic of the pristine copper interior bends the light of the spotlights and projects it onto the sculpture's shadow below.

Partially non-reflective characteristic-based boundary conditions, with the linear relaxation form suggested by Rudy and Strikwerda, [J. Comput. Phys. 36 (1980) 55 70], are considered.

We observed that the proposed reflective composite sheet, with overlaps of more than 1 μm in size, had distinct polarization and reflectance characteristics and, thus, confirmed the feasibility of the design for the production of actual reflective polarizers.

Overall, this research provides a solid foundation for future research in exploring reflective cracking characteristics of CIR mixtures.

The reason for this phenomenon is that low microphone density cannot provide enough DPD samples to measure the entropy (Pielou's evenness index), and DPD standard deviation representing the average spread of DPDs about zero is more reflective for characteristics of the DPD distribution related to the beamforming gain.