Sentence examples for reduction of section from inspiring English sources

One of the beams was strengthened with undamaged CFRP rod while three beams presented bond defects between rods and concrete as well as notches in CFRP rods with a reduction of section for a segment.

Experimental free vibration of CFRP cantilever beam elements were investigated by dynamic tests; damage of CFRP specimens were locally due to double notches close to the fixed end with different reduction of section and bending stiffness.

According to this model, when a URM pier experiences a reduction of cross section due to either tensile or compressive failure, the remaining part of the pier will typically be inclined at some angle.

The local reduction of the section at the point of load application is explicitly included.

The material specific constant, D, reads from the reduction of cross section, R, in a tensile test, D = lnleft(frac{100}{100-R}right).

For the Dam Condition ten option are available (Casagli and Ermini, 1999): Partial blockage: if the obstruction of the riverbed caused by the landslide is not complete (Type I of the Costa and Schuster (1988) classification) without the formation of an impoundment and a dam, but with the reduction of riverbed section.

Our group previously demonstrated reduction of cross section size of the AVL constructs when recombinant growth factors VEGF and bFGF were suspended within the fibrin matrix, leading to increased angiogenesis and fibrovascular tissue formation [ 23].

Results show that the selection of a suitable bay width produces a considerable reduction of VBE sections, especially in high-rise SPSWs.

The use of high strength steel in tall buildings has the ability to achieve tremendous benefits as the material provides a higher strength to weight ratio, hence allowing the reduction of cross-section dimensions.

The desired microstructure with the fine spheroidal carbides dispersed on the ferrite matrix has been observed, and the well combined mechanical properties, such as the tensile strength Sb = 1050 MPa, the yield strength Ss = 740 MPa, the elongation ratio δ5 = 14% and the reduction of cross-section ψ = 22%, are achieved.

Recently, a quality improvement intervention in a Tehran hospital resulted in reduction of cesarean sections [ 20], suggesting that systematic approaches may yield positive outcomes.