Sentence examples for reduction in deflection from inspiring English sources

The results indicate that a significant reduction in deflection is possible over an equivalent flange-stiffened design.

The unbroken girder when strengthened, produced a 30% reduction in deflection for the same moment while bending stiffness was increased by 30% from its initial un-strengthened state.

It is observed that considerable reduction in deflection and/or bending stress can be achieved by proper selection of the thickness variation.

Because optimum operation of microfan series arrays is strongly related to frequency selectivity and non-uniformities in the fabrication process, the mechanical Q-factor was measured in order to estimate the reduction in deflection amplitude that occurs when fans are driven at frequencies slightly off resonance.

The design was optimized to attain the structural strength i.e. reduction in deflections and bending stresses.

When temperatures rose, the loads on shores decreased, accompanied by a reduction in slab deflection.

Overall, 60%% reduction of car-body vertical acceleration and 25 % reduction in guideway deflection can be achieved using the present optimized parameters.

acceleration, for a given suspension travel, and up to 50% reduction in tire deflection, for a given acceleration level.

The four point bending experiment indicated that the tapered FRP strip end design augmented significantly the ultimate load and mitigated the reduction in beam deflection corresponding to the ultimate load, compared to the beams bonded with constant thickness FRP strips.

These results are useful for armor designers since the reduction in the maximum deflection should reduce the intensity of injuries to persons wearing the armor.

103 107 This is typically manifested as a reduction in the lateral deflection or 'curve' of the projectile and an increased flight, as the projectile will travel more easily through the thinner air.