Sentence examples for reduction in compressive strength from inspiring English sources

Also, compression after impact tests were conducted to determine the reduction in compressive strength when comparing impacted to non-impacted samples.

Test result indicated that there was reduction in compressive strength and modulus values.

The significant reduction in compressive strength is noticed, when the HPC mix is exposed to H2SO4 solution.

But the use of FRA led to a reduction in compressive strength but increase in shrinkage values.

Percent reduction in compressive strength and stiffness due to high temperature was similar for all specimen sizes.

Tests showed important deformations and drastic reduction in compressive strength, especially for crumb rubber percentages greater than 20%.

The inclusion of 10%% slag with 60 % FA caused a reduction in compressive strengths at all ages, relative to F70.

Experimental evaluation of the complete stress-strain response depicts reductions in compressive strength, elastic modulus, and crushing strain, with the change in rubber content.

The aggressiveness of oil is very clearly observed for low- and high-strength concrete, and the reductions in compressive strength were observed to be 17% and 11.8%, respectively.

The significant reductions in compressive strength of the control heat-damaged CH2 and CH3 columns were accompanied by more severe reductions in initial axial stiffness of about 69 and 74%, respectively as shown in Fig. 10b.

The significant reductions in compressive strength and modulus of elasticity of the heated concrete were not large enough to induce buckling in the columns as verified by the nominal axial strength at zero eccentricity (P o ) and the critical buckling load (P c ) values of the four control heated specimens presented in Table 5.