Sentence examples for reduced coefficient of friction from inspiring English sources

Such part might be related to the slightly reduced coefficient of friction in the stable stage.

By using the optimal design parameters, a confirmation test successfully verified that the N2-gas lubrication reduced coefficient of friction by 24%.

Al12Si15ZrC shows reduced coefficient of friction and specific wear rate while the load and sliding distances increases with increase in wt.% of carbide reinforcement.

This Si-DLC based layer system combines the benefits of a reduced coefficient of friction with a high wear resistance.

The combination of reduced coefficient of friction and microstructure modifications has resulted in improved wear resistance for sample CrSiCN-2 (with a wear rate ∼ 60% lower than CrN).

The reduced coefficient of friction is largely influenced by the carbon fiber reinforcement due to the auto-protecting film formed as a paste in the contact area and along the wear track edges.

It was found that under all test conditions, SMAT was effective in reducing material removal by 2 to 4 times and reducing coefficient of friction against an alumina slider.

CuO and CuS thin films reduced the coefficient of friction due to the low shear strength of bonding in transfer films.

Experimental results showed that such MoS2 coatings influenced greatly the fretting regimes and reduced the coefficient of friction.

It was identified also that the transfering of oxide films from the active counterfaces protected the LPIM-alumina from severe wear and reduced the coefficient of friction, wear rate and brittle fracture of the structural ceramic.

At higher applied load, sliding speed and sliding distance, it was found that gas blown to the sliding surfaces in air effectively reduced the coefficient of friction as compared to the air lubrication.