Sentence examples for reduce the structure from inspiring English sources

The nonprofit center, which says it owns the "largest and most significant collection of American Revolution objects," said that after five years of planning for a museum to tell the story of the Revolution, the Park Service proposed to reduce the structure to 50,000 square feet from 90,000.

Compared with sputtering, this method could reduce the structure damage of the polymer introduced by particle impact.

These vehicles have great potentials and research in this topic is increasing aimed to reduce the structure weight to maximize flight time, range and payload.

If we can reduce the structure size of onshore heavy oil pumping unit to match the offshore platform, the mature onshore heavy oil development model can be the reference for offshore.

The main idea was to reduce the structure complexity but to retain the mechanical properties like characteristic dimensions, the distribution of mass and stiffness, and to make them easy to change.

SEM images show the similar geometric structure in transverse and longitudinal sections and multilayer –dense epicuticle and exocuticle, followed by bridge piers with a helix structured fibers, which connect the exocuticle to the endodermis, and form an ellipse empty to reduce the structure weight.

The active noise control system is used to reduce the air-borne noise radiated via the duct outlet whereas the active vibration control system is used to both reduce the structure-borne noise radiated by the duct wall and to minimise the structural feed-through effect that reduces the effectiveness of the active noise control system.

To reduce the structure-borne noise of a vibration structure, the piezoelectric shunt damping system was designed using the optimal design of circuit elements and the design of experiments method.

Two different methods to reduce the air-borne sound and two methods to reduce the structure-borne sound from a steel bridge were investigated: the high screening girder was provided with a sound absorber on the side facing the trains; all openings between and around the sleepers were filled with a covering consisting of 50 mm thick plank; the track was vibration isolated; and the steel was damped.

The increase of the emulsifier amount would most probably reduce the structures' size below 100 nm (the limit between the two scales) because emulsifiers produce lower interfacial tension and increase the stability of colloidal dispersions, therefore avoiding aggregates' formation.

Pd modification of the Au hkl) surfaces, therefore, significantly reduces the structure sensitivity of the ORR.