Sentence examples for reduce the collapse from inspiring English sources

Additionally, the transverse seat width is found to be critical to reduce the collapse probability of the superstructure.

The first minimizes the amount of FRP reinforcement for economic feasibility, and the second maximizes the spectral acceleration of ground motion that causes the collapse of a structure to reduce the collapse risk.

Large diameter pipelines installed in these areas are exposed to the severe pressure loading resulting from the water depth and any pre-installation damages sustained during transportation or pipelay and may reduce the collapse and buckle propagation resistance drastically.

Hence, both "thorough debridement" and "partial debridement" are not universally accepted because no compelling evidence indicates which method is better at reducing the collapse risk of the femoral head, which encourages us to apply our experiences to a computational biomechanical analysis of the extent of debridement to reduce the collapse risk of FHN.

That investigation concluded that a construction design used to withstand earthquakes would have helped the building survive the blast, reducing the collapse as much as 85percentt.

The paper demonstrates that the use of damper improves the performance of the steel MRFs and reduces the collapse probability in comparison with the conventional steel MRFs.

A modified expression, Pcdin−3="α(1−β2∕din2) with α and β numerical parameters, which reduces the collapse pressure for low diameters is proposed.

A semi-continuous process using scCO2 is reported for processing polymer clay composites with high clay loading (i.e. 10 wt %) by reducing the collapse of the exfoliated clays.

As opposed to minihalos, photoheating is not able to significantly suppress accretion, since the virial temperature of the halo is of order the temperature to which the gas is heated, and momentum transfer by photons only mildly reduces the collapse rate (Johnson et al. 2011, 2012).

Reducing the collapsing parameters (assemblers' options that define the threshold for accepting an overlap between two reads) values helps assemble a higher percentage of reads into the assembly with the fewest number of chimeric contigs.

It is necessary to reduce the initial collapse stress in the damping and energy-absorbing structures, so combinations without clapboards can be used.