Sentence examples for recommended speed from inspiring English sources

The meaning of the first is something like 'No left turn!'; the meaning of the second is roughly 'Left turn; recommended speed 30mph or less.' (If you didn't know that the second sign means this you can check it here).

The limited research shows that older drivers like CSW systems, and in experimental tests, use of the systems resulted in older drivers taking turns at speeds that were closer to the recommended speed.

V2V communications are mainly used by safety applications (e.g., cooperative collision warning, pre-crash sensing/warning, hazardous location, cooperative awareness) while I2V communications are typically used by traffic efficiency applications (e.g., traffic Signal Phase and Timing--SPAT, recommended speed and route guidance).

This isn't because the MonoRover hates fun; it's because once you exceed its recommended speed, it starts bucking like nobody's business and inevitably tosses you off like a kid who's lost control of a swing.

The simulation scenario was relatively simple, and there were a few recommended speed signs and one command of lane change, without external objects.

The recommended speed sign (noticed at 1300 m) and the reaction of xDriver changed the need for safety traffic regulations (it started to rise to the top and stayed there until braking).

The academies recommended speeding the adoption of new energy technologies and encouraging changes in behavior that curb energy use and greenhouse-gas emissions.

We took some curves far faster than the recommended speeds, and the GT40 simply motored through without body lean or tire squeal.

For example the HSRCA system (High Speed Rail Corrugation Analyser), a not-in-contact system with Axle-box Accelerometers, is extremely reliable even at relatively high speeds (maximum recommended running speed of 120 km/h) [26].

"We could not ascertain the speed of the bus at that time, but it was most certainly far higher than the recommended maximum speed for this terrain," he said.

The calculated average exit speed from the holes of fluidizing agent (flue gas + steam) is W = G/S = 36 m/s (the recommended starting speed is 35…40 m/s).