It is used to display real-time cutting depth and control the reciprocating motion of the resistance rod of the micro-tiller.
Micro-mechanical response of the coatings was analyzed by instrumented progressive load scratch, while wear resistance by dry sliding linear reciprocating tribological tests.
It is observed that 1080 steel exhibits higher scuffing resistance than gray iron in reciprocating sliding, whereas it is completely opposite in rotational sliding.
The scratch performance of the coatings was tested using progressive- and constant-mode scratch tests, and the wear resistance was examined using dry sliding linear reciprocating tribological tests.
The wear resistance was characterized by dry sand/rubber wheel and reciprocating pin-on-plate tests.
Reciprocating ball-on-flat wear tests were conducted to assess the wear resistance of the nitrided case, with the wear scar being characterized using scanning electron microscopy (SEM) and optical profilometry.
Deposition conditions which enhance the formation of thinner splats and nano-particulate alumina were found to improve the sliding wear resistance of the coatings when mated with an alumina ball under reciprocating test conditions.
The aim of this study was to compare the CF resistance of K3 (SybronEndo, Orange, CA), K3XF (SybronEndo), and TF (SybronEndo) files under continuous rotation and reciprocating motion.
The cyclic fatigue resistance of three types of nickel-titanium rotary files was compared in a model using reciprocating axial movement.
Wear resistance of the injection moulded substrates were examined against a spherical steel counterpart by dry-sliding linear reciprocating tribological tests.
