Sentence examples for receiver signals from inspiring English sources
Each Virtex4 SX55 is used to process the receiver signals of each user.
The final section sketches the feedback controller that processes the receiver signals, and controls the moveable launcher and the gyrotron power.
When this process ends, the receiver signals to the transmitter that the synchronization process has been completed through the o_sync_ready signal and begins the normal operation.
Within that time the PCB extracts both transmission pulses and receiver signals from the MU wireless adapter in such a way that the RTS frame departure is used as the trigger to start the count that would be stopped by the corresponding CTS frame arrival.
The trailing edge of the transmitter pulse was not perfectly sharp and caused the receiver signals to ring for a short time even if they were turned on after the pulse was ostensibly complete.
Both the clock and receiver signals were digitized using a custom designed LabVIEW VI.
where P K) means the probability that the receiver receives signal on sub-channels belonging to set K.
Figure 1 DVB-T2 receiver signal processing chain block diagram.
In CR-type wideband receiver, signal dynamics can be tens of (even 50-60) dBs [5, 6].
The general structure of the DVB-T2 receiver signal processing chain is shown in Figure 1.
As shown in the Fig. 9, (1) represents the receiver signal, and (2) represents the transmission signal.
