Sentence examples for reasonable signal from inspiring English sources
The phrase "reasonable signal" is correct and usable in written English
It can be used in contexts where you are discussing the adequacy or appropriateness of a signal, often in technical or analytical discussions.
Example: "The data provided a reasonable signal that the market was about to shift."
Alternatives: "valid indication" or "sensible signal"
But a reasonable signal might be when he starts sharing sensitive information about himself.
64 scans were accumulated to get a reasonable signal to noise ratio.
Measurements were taken in ambient conditions, at room temperature, on solutions diluted to yield reasonable signal intensity.
The proposed cell design shows a reasonable signal washout (signal decay within less than 10 s to background level), high sensitivity and good signal stability (in the range 6.6 11.7%).
To minimize the penumbra effect due to the focal spot size, the object-detector distance was chosen as the minimum achievable, while the source-detector distance was set large enough to obtain good resolution while keeping a reasonable signal intensity.
From our experimental results, it is observed that textile electrodes having cotton (30) /nylon fiber coated silver (70) provides less air resistance (0.17 KPa∙s/m), optimized tactile comfort (9/10), reasonable signal to noise ratio (SNR) value of 30.78dB, and better thermal conductivity (0.018W/m∙K) than compared electrodes.
Implications for flowmeter tube design and for the choice of frequency of operation to achieve reasonable signal-to-noise ratios are explained.
This preference results in a reasonable signal-to-noise ratio (ratio of current under illumination to current in the dark) at room temperature.
This assumption can be fulfilled for distance estimation based on, for instance, time of flight for a reasonable signal-to-noise ratio [43].
Rather, it is usually necessary to perform data smoothing either during image reconstruction or afterwards to achieve a reasonable signal-to-noise ratio (SNR).
It is shown that the proposed approach achieves low symbol error rate (SER) at a reasonable signal-to-noise ratio level.
