Sentence examples for reactor by using a from inspiring English sources

Substantial amount of CO2 is captured before the FT reactor by using a dual-stage, selective physical solvent-based process.

It is not in general possible to rely on evaluating kinetic data from an eccentric annular reactor by using a 1D-model.

This work describes the procedure for the simulation of the operation of a photocatalytic reactor by using a multiphysics computational fluid dynamics (CFD) model based on the determination of the intrinsic kinetics parameters in an optically differential photoreactor.

Therefore, this study optimized the final temperature of pyrolysis and N2 flow rate parameters for the pyrolysis of silverskin in a fixed bed reactor, by using a central composite design and response surface.

The scheme proposed includes a procedure for selecting the heliostats to be focused on the reactor by using a simple model of the solar field and a gain scheduling control system which changes the control tuning parameters to deal with the varying dynamics observed during the process.

In this work, we address the issue of solving detailed mathematical models of chemical reactors by using a method based on the least-squares formulation.

Instead of using a wall heat transfer coefficient, the model accounts for the higher resistance to heat flow near the reactor wall by using a lower value of the thermal conductivity.

A longer contact time is achieved by increasing the reactor volume by using a longer enzyme-modified capillary.

A WGS reactor is modeled by using a REquil block, which is an equilibrium based reactor in Aspen Plus.

The fixed-bed reactor was modelled by using a one-dimensional heterogeneous plug-flow model.

The nonlinear behaviour of the reactor is analysed by using a special function developed in the present paper.