Sentence examples for reactor I from inspiring English sources

In the electrochemical reactor: (i) chlorine is generated at the anode for use as the oxidant in the leach reactor, and, simultaneously, (ii) at the cathode, the dissolved metals are electrodeposited from the leach solution.

The quantity of biogas generated by the substrate is obtained by subtracting the amount of biogas produced in the control reactor, i.e., inoculum alone.

The performance of the carbon membrane reactor for the dehydrogenation was found to exceed that of a normal reactor, i.e., equilibrium conversion.

These conclusions are confirmed by the results of the simulation of a model reactor, i.e. the laminar film reactor with a catalytically active wall.

The entire flow behavior and PSD in the tubular loop reactor, i.e. PSD, solid holdup and liquid phase velocity distribution, were also obtained numerically.

It was found that the sensitivity of peak temperatures was quite similar for the two situations of the reactor, i.e., above- and below-ground.

In the first stage (dark fermentative H2 production, DFHP), response surface methodology (RSM) with a Box-Behnken design (BBD) was applied for optimization of operational parameters, including cycle-frequency, HRT, and substrate concentration, using an intermittent-continuously stirred tank reactor (i-CSTR).

Two FTS experiments were carried out using two reactors i.e., with and without static mixer insertion within catalytic beds.

It is to be noticed that only biocenoses of single-stage reactors, i.e. of a monophasic biogas process are considered.

However, it is not clear that currently proposed external reactor vessel cooling (ERVC) without additional enhancements can provide sufficient heat removal to assure IVR for high power reactors (i.e., reactors with power levels up to 1500 MWe).

The proposed BSR configuration offers two important advantages over conventional slurry reactors, i.e., complete conversion of the liquid reactant and no need for expensive solid liquid separation.