Your English writing platform
Free sign upSuggestions(1)
Exact(1)
First, its side-chain electrophilic group should be sufficiently reactive to enable efficient peptide cyclization upon reaction with a proximal cysteine in intramolecular settings, but not too reactive in order to avoid side reactions with competing nucleophiles present in the cellular environment (e.g., glutathione).
Similar(59)
The reactive power is determined by comparing the reactive power current capability of the converter, i q1, with i q2, which corresponds to the appropriate amount of reactive power in order to keep the voltage at the terminals of the converter at 400 V: i_{q} = hbox{min} { i_{q1},i_{q2} } (8) i_{q1} = sqrt {I_{N}^{2} - i_{p}^{2} } (9 where I N is the nominal current of the converter.
Hybrid routing protocols try to combine proactive and reactive techniques in order to reduce protocol overhead.
First, we consider the vector control strategy of the active and reactive powers in order to ensure an optimum operation.
Experimental tests have been carried out with two different reactive salts in order to prove the validity of the charge discharge operating line.
A 50 50 w/w waste iron/sand mixture was used as candidate reactive media in order to activate precipitation and promote sorption and reduction oxidation mechanisms.
The heat (concentrated solar radiation) is supplied on a small peripheral surface and has to be dispersed in the entire reactive volume in order to activate the reaction all over the material.
Nanolaminated titanium titanium nitride [Ti TiN]n structures have been deposited on silicon 〈100〉 substrates by RF reactive sputtering in order to study their mechanical properties.
To this end, we have simulated the behavior of the adaptive routing protocol in two scenarios, which will now be discussed, and compared it to traditional proactive and reactive routing in order to have a reference point.
Due to enhanced capacity of the operational control unit the Multi-String-converter can be used additionally for active compensation of harmonics and reactive power in order to improve the power quality.
In this paper, double layer films of SiO2/Si3N4 were prepared on sapphire (α-Al2O3) by radio frequency magnetron reactive sputtering in order to increase both transmission and high temperature mechanical performance of infrared windows of sapphire.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.
Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com