Sentence examples for ratio specification from inspiring English sources

This chapter concentrates on highlighting certain important aspects of voltage selection calculation of transformer voltage ratio, specification of insulation levels, examples of voltage regulation, rating, tap ranges, and impedance calculations, and thermal aspects—specification of temperature rise and ambient conditions.

This chapter focuses on highlighting certain important aspects of power transformers: voltage selection – calculation of transformer voltage ratio, specification of insulation levels, examples of voltage regulation, rating, tap ranges, and impedance calculations; and thermal aspects – specification of temperature rise and ambient conditions.

Look at the contrast ratio specification.

The numerical simulation results are performed for a conventional DI diesel engine with constant compression ratio (specifications and operating conditions are given in Table 1).

Table 3 Variable compression ratio engine specifications Number Engine parts Specification 1 Make and model Kirloskar/PS 234 2 Number of cylinder Single 3 Ignition system Compression ignition 4 Bore and stroke 87.5 × 110 mm 5 Rated power 3.5 kW at 1,500 rpm 6 Cooling medium Water-cooled 7 Combustion chamber Open chamber (direct injection) 8 Compression ratio 12 1 to 18 1.

Manual optimization: is being held manual and gradual change of Deethanizer load parameter distribution (HK-001) without causing disturbances in the tower and did not increase your reflux ratio for top specification.

The picture's contrast ratio — a commonly used specification that indicates the range of brightness from white to black — is measured in absolutely pitch-black rooms.

For the selection between models we relied in the first place on information criteria, and secondly on a likelihood ratio according to the specification of Davies (1987 .21 Table 6 shows the Akaike and Schwartz Information Criteria (AIC and BIC, respectively).

For this reason, a model validation process is carried out by an assessment of residuals, and also a model selection process by using information criteria and a likelihood ratio test following the specification by Davies (1987).

To eliminate the error introduced by the differences between test strips and samples, we used HCG samples to set a threshold of T/C ratio to determine the specification.

A key assumption in the PH model is that the hazard ratio comparing any two specifications of covariates is constant over time (commonly known as PH assumption).