Sentence examples for ratio properly from inspiring English sources

An analytical model for amplification ratio calculation is established based on the Euler Bernoulli beam theory because other simple theoretical approaches cannot predict the ratio properly.

With the values of oil retention time and flow rate ratio properly chosen, it is found that the one-state reactor with catalysts under the optimal conditions can significantly improve the reactor performance.

Overnight treatment of cells with chloroquine or bafilomycin A1 was done as a control to show that the mCherry/GFP fluorescence ratio properly decreased in the absence of autophagic flux, while treatment with EBSS (not shown) was done to show that the ratio properly increased.

Thus, when vegetables are excluded from the score the mortality ratio, properly adjusted for the change from a 10 point to a nine point scale, increases from 0.864 to 0.886 that is, the beneficial effect of the Mediterranean diet score is reduced from 1−0.864=0.136 to 1−0.886=0.114 or by 16.2%.

Therefore, a new experimental program dealing with a wide range of cross section typologies (I and H sections, Square and Rectangular Hollow sections) under monotonic and cyclic loading has been carried out by testing specimens with different local slenderness ratios properly selected to integrate the data already available in the technical literature.

It is demonstrated that measured ratios, properly estimated, are transitive from sample to sample.

Considerable improvement in the performance is obtainable if operation is carried out by increasing plate aspect ratio, and/or properly increasing inclined-angle, and/or properly decreasing plate spacing.

Considerable improvement in the performance is achievable if operation is carried out by increasing plate aspect ratio, and/or properly increasing the inclination angle and/or properly decreasing plate spacing.

When this ratio is properly applied, it gives the mortar a higher yield stress and viscosity.

The linseed oil content, carrageenan concentration and surfactant oil ratio were properly combined in a surface response design for maximizing the hardness and minimizing the syneresis of the PUFA delivery system.

There are more sophisticated ways to estimate the rate ratio while properly accounting for such time-varying exposures, such as Cox proportional hazards models with time-dependent factors.