Sentence examples for ratio of slots from inspiring English sources

denotes the average ratio of resource allocated to user (e.g., the average ratio of slots or quantity of resource in the frequency and time domains).

Indeed, she adds, new programs aimed at reversing these trends, such as NIH's large new grants to "bridge" the gap between postdoc status and a first faculty post, won't solve the problem because "the ratio of slots to people is too low, and I'm concerned that it will send very negative signals," Stephan says.

Conservative guidelines are given for selection of the minimum size of openings for reliable flow of non-cohesive grains; for vertical slots, the ratio of minimum slot width to characteristic particle dimension is 4.6, for horizontal slots the ratio is 3.3 and for horizontal orifices, the ratio of orifice diameter to characteristic particle dimension is 6.4.

Thus, to allow for the harmonics of the time slots, a ratio of time slot occupancy of 50% traffic/no traffic was applied over the period of the tests.

Aspect ratio of the slot-diffuser is the non-dimensional ratio of the slot's length and width.

The design variables include the ratio of inlet slot width to swirl chamber diameter, ratio of inlet slot height to swirl chamber diameter and the inlet slot angle.

The only correction needed to correctly predict flame speeds in this case is due to the finite aspect ratio of the slot used to inject the premixed gases which induces a flow acceleration in the measurement region (this correction can be evaluated from velocity measurement in the slot section or from an analytical solution).

Figure 2 Number of slots versus the arriving ratio r a when the staying ratio r s is fixed at 0.5.

Fourth, the channel utilization is defined as the ratio of the number of time slots used to the number of time slots per hyperframe, viz 2,250.

Two pairs of three-element metal strips are utilized as a power director to increase the forward power and enhance the front-to-back ratio of the SI open-slot antenna.

The control byte overhead also decreases with the growing number of slots as the discovery ratio increases, as shown in Fig. 8 d.