Sentence examples for ratio of load from inspiring English sources

The pipe stiffness of concrete pipe under TEBT was characterized using the ratio of load to the reversible deflection at the crown of pipe during cyclic loading.

Besides ROM, neutral zone quantification was the second most common parameter assessed biomechanically, followed by intradiscal pressure and the ratio of load to displacement (stiffness).

The critical parameter for determining between JKR and Hertz is the ratio of load to pull-off force 5 For indenting the flat and curved specimens at a load of 1000 μN these ratios are 4.1 and 20.2, respectively.

Ratio of load-distributed to height of specimen (2t/h = t/D) for split tension cube specimen.

Vertically perforated clay blocks with an excellent ratio of load-bearing capacity to thermal properties are highly sophisticated products, which due to their higher complexity require advanced design concepts for a reliable prediction of performance characteristics.

(3) The relationship between the width of the central region and the ratio of loading pebbles is approximately linear in the taller vessel.

The critical strain energy release rate for the solder joint fracture was measured as a function of the strain rate and the mode ratio of loading.

Zhai and Stewart (2010) presented a new theoretical equation with the material strength, types of live load, the ratio of dead load to live load, and the combination of the eccentricity and concentric load as parameters to establish the safety guideline for reinforced block walls in China, and verified the appropriateness of the equation through tests.

Nonetheless, this method could be applied to predict secondary features such as the ratio of weekday load to weekend load.

Sensitivities of the reliability index to the ratio of variable load to permanent load, ratio of reinforcement, section depth, radius of longitudinal reinforcing steel, nominal cover, concrete cube strength, and allowable width limit were discussed.

For the specific apparatus used in this study, changes in thickness produced changes in the ratio of shear load to clamping load for a specific fretting pad geometry.