Sentence examples for ratio of depth from inspiring English sources

The relative depth is defined as the ratio of depth of flow on the floodplain to the flow depth in the main channel.

In Dongjin and Hwayeong, the highest ratio of coverage was similar to the three anther culture lines on chromosome 5, but chromosome 9 had the highest ratio of depth.

Different trench diameters were tried for the growth of nanowires, and it was observed that for a particular window of h/D ratio (where h/D is the ratio of depth to diameter of the trench) only, nanowire growth occurs.

Figure 2b is the cross-section picture, which shows that the periodicity of nano-patterned structures is 300 nm and the depth is about 51 nm so that the aspect ratio defined as the ratio of depth (H) to diameter (D) (H/D) is less than unity.

The value of degree of restraint is always less than one and it is affected by m and α which are, respectively, ratio of elastic modulus of substrate concrete E2 to E*and ratio of depth of repair material d to total thickness of overlay plus substrate concrete h.

Parametric studies are carried out to study the influence of the following parameters on the shearing capacity and deformation in panel zone: ratio of width to thickness of column, the concrete strength of panel zone, the axial load ratio of the column and the ratio of depth to width of panel zone.

Ratios of depth of pit penetration in aquifer to aquifer thickness, pit bottom radius to its top radius, inverse of pit advance time and the HH in the observation wells to the distance of observation wells from the centre of the pit were used as inputs to the networks.

Results of in situ tests showed that the ratio of carbonation depth to cover depth was less than 0.2 for harbor concrete structures.

Legislation and other practical considerations motivate our assumption that sandpits are both wide (horizontal dimensions of the order of kilometres) and shallow (the ratio of pit depth to water depth being small).

We have confirmed this experimentally by calculating peak signal-to-noise ratio (PSNR) of depth and luminance measurements, using ground truth images obtained by temporal averaging of the 200 static frames.

These parameters include the ratio of water depth to tank length, called water depth ratio, the ratio of sloshing frequency to structural natural frequency, called tuning ratio, and the ratio of excitation frequency to natural frequency of the structure, called excitation frequency ratio.