Sentence examples for ratio layer from inspiring English sources

An increase of RF-power input, oxygen-to-monomer flow rate ratio, layer thickness or decrease of process pressure was found to enhance the gas barrier performance.

The stability of the beam under different geometric and material parameters, like length/height ratio, layer thickness, and ply orientation, was investigated.

Here we examine the influence of microstructural features such as ceramic/polymer ratio, layer thickness, and presence of bridges between ceramic lamellae, on the mechanical performance of the resulting composites.

Results of a detailed parametric study are reported for bilayered plates of clamped and simply supported boundaries, which show the effects of radii ratio, layer disposition etc., on the dynamic stability.

In the high Mg/Si ratio layer, the self-diffusion coefficients of oxygen show higher values than those in the low Mg/Si ratio layer.

In the high Mg/Si ratio layers, the self-diffusion coefficients of oxygen show larger values than in the low Mg/Si ratio layers (Figure  10a).

Meanwhile, the parametric effects of length-to-thickness ratios, layer numbers, fiber orientations and modular ratios on the deflections and frequencies are performed and discussed in details.

For recording AMPA/N-Methyl-D-aspartate (NMDA) ratios, layer II/III pyramidal neurons were patched with intracellular solution containing (mM): 120 CsMeSO3, 8 NaCl, 15 CsCl2, 10 TEA-Cl, 10 HEPES, 2 QX-314, 4 MgATP, 0.3 Na2GTpH(pH 7.3).

Suitable choice of material of layers and ratio between layer thicknesses can lead to higher value of the so-called apparent fracture toughness, i.e. higher resistance of the ceramic laminate to the crack propagation.

Specimens Reference EPS specimen Rubber specimen Paper specimen Cement (g) 750 Sand (g) 1500 Water (g) 375 W/C ratio 0.5 EPS (layer) – 3/6/9 layers – – Rubber (layer) – – 3/6/9 layers – Paper (layer) – – – 3/6/9 layers.

This can be established by comparing the average lattice constant of the SL, determined through the ratio of layer thicknesses in the SL (tGaN/tAlN), with the lattice constant of the buffer layer.