Sentence examples for ratio elements from inspiring English sources

2D and 3D mesh grids with high aspect ratio elements are utilized to discretized the liquid film at the tube's walls.

Figure  12 shows the distribution of the Mg/Si ratio, elements, and the two-dimensional self-diffusion coefficients of oxygen of the system with a 28-nm liquid film.

The method combines the advantages of the VOF method in terms of mass conservation and the LS method in terms of accuracy of the surface tension implementation and can handle both 2D and 3D domains discretized by either structured hexaedra or unstructured tetrahedral grids with high aspect ratio elements, thus guaranteeing flexibility and robustness.

The stereolithography (STL) format surface model thus obtained was, however, still not suitable for FE analysis; it required further preprocessing in order to detect whether high aspect ratio elements and gaps were left in the model, and also to adjust the element side between 1 mm and 3 mm, so as to retain the accurate geometry of the spine.

Use of a ratio element such as magnesium or calcium, which has a narrower range in cord blood, is being explored to normalize other element values.

They can be implemented on coarse meshes, eventually unstructured and involving high aspect-ratio elements to reduce the dimension of the solving system, while preserving adequate levels of accuracy.

As very thin thermoelectric films are employed with modest temperature gradients, high aspect-ratio elements are needed to meet the − usually ignored − requirements of practical applications for the current.

Figure 11 Mg/Si ratios, elements, and self-diffusion coefficients of oxygen for forsterite-MgSiO 3 with 7-nm liquid film.

(c) Distribution of two-dimensional self-diffusion coefficients of oxygen parallel to the forsterite surface at 1,673 K. Figure 12 Mg/Si ratios, elements, and self-diffusion coefficients of oxygen for forsterite-MgSiO 3 with 28-nm liquid film.

To determine the molecular ratio of elements in the compound, you need to convert the amount of each element from grams to moles.

For instance, the results of element-to-element ratio of major contributing elements showed the increase in ratios of Al/Cu, Al/Fe, Al/Mn and Al/Zn in patients compared to control (Table 2).