Sentence examples for rate of interface from inspiring English sources

Some other studies have found several underlying factors that impact the recognition or understanding rate of interface sign.

The effects of test temperature, oxidation and fiber preforms on the degradation rate of interface shear stress have been investigated.

This, together with the reduction in the channel current, suppresses the impact ionization and further reduces the generation rate of interface traps due to hot carrier injection (HCI).

Our analysis concludes that, compared with the corresponding homogeneous structure, symmetrical negative-exponent gradient active plates or positive-exponent gradient bilayer electrodes can significantly reduce the maximum compressive stress and the stress drop at the electrode collector interface, while the energy release rate of interface delamination is slightly weakened by it.

The helmet is associated with a better tolerance and a lower rate of interface-associated complications [ 14].

The critical strain energy release rate of the interface reached values G1C ≥ 6 kJ/m2 for contact time less than 10 s.

The analysis conducted is numerical using finite elements and a revised virtual crack closure technique for calculating the energy release rate of the interface crack.

This new discretization is consistent with the re-initialization procedure and it guarantees a second-order convergence rate of the interface curvature on gradually refined grids.

Those experimentations were done in different temperatures and catalyst concentrations and the rate of gas liquid interface changes, liquid mass transfer coefficient, and reaction constant rate were computed using Danckwerts model [2].

The bond failure occurs when the amount of energy required to remove the bonds across a unit surface equals the critical energy release rate of the interface between the two layers.

The time frequency analysis of the reflection waveforms shows that the temporal decay rate of interlaminar interface echoes at the stop-band frequency is a good indicator of the porosity content.