Sentence examples for range can be calculated from inspiring English sources

The HSS range can be calculated from a parameter called SCF.

The range can be calculated on the basis of Blasius law for a rectangular flow cell (Jones 1976).

Interference range is the distance up to which transmission from a node will interfere with others, and the co-channel interference range can be calculated from Equations 5 and 6 as below: R^{prime} = d = root k of {frac{{P_{t} cdot G_{r} cdot G_{t} cdot {h_{t}^{2}} cdot {h_{r}^{2}} }} {text{CS}_{text{th}}}} (7).

For TOA-based range measurements, the two-way TOA ranging protocol is adopted [9] and the range can be calculated as widehat{d}=ccdot frac{{widehat{tau}}_{mathrm{RTT}}-{widehat{tau}}_{mathrm{TAT}}}{2} (4 where c is the propagation speed of ranging signals, ( {widehat{tau}}_{mathrm{RTT}} ) is measured round trip time, and ( {widehat{tau}}_{mathrm{TAT}} ) is measured turnaround time.

By averaging r i (g) over the distribution of g, (f(g)), the average maximum transmission range can be calculated as follows: begin{array}rcl@ r&=&int_{0}^{+infty}{r_{i}(g) f(g) dg} &=&left(frac{P_{t}}{P_{min}}right)^{frac{1}{alpha}} int_{0}^{+infty}{g^{frac{1}{alpha}} exp -g) dg} &=&lexp -gac{P_{t}}{P_{min}}right)^{frac{1}{alpha}} Gamma sleft(frac{1}{alpha}+1right), endgarray} (3).

When the signal intensity (processed signal) for each Spike-in transcript is plotted against the log of the relative concentration, the linear range can be calculated based on parametric curve-fit through the data.

However, since the system is underdetermined with these constraints, only flux ranges can be calculated via FVA.

Although only flux ranges can be calculated with the constraints of scenario 1, some conclusions can already be drawn from them as we will discuss below.

For example, Germany has a history in HBM programs, with the first German Environmental Survey (GerES) reaching back as far as 1985–1986; Calculated reference values: Based on the data obtained in the Pilot Study, reference values and ranges can be calculated for Europe as well as for the individual participating countries.

The differential phase between ψ A h (ξ ; r) of this segment and the phase of HAc(ξ ; r) for each range gate can be calculated through range history, and be compensated for this segment.

Therefore, when the error margin % is permitted to be based on, the probability that is in the range of can be calculated statistically [9].