The phrase "range approximately from" is correct and usable in written English.
You can use this phrase when you wish to indicate that a set of values, measurements, or quantities have a lower and upper limit. For example: "The size of the crocodiles in this region range approximately from five to seven feet."
A voice with a range approximately from the A below middle C to the second F or G above is termed a mezzo-soprano.
Winters much colder and longer, with greater snow cover, than in western Europe are coldest in the northeast, and summers are hottest in the southeast; the January to July mean temperatures range approximately from 50 to 70 °F (10 to 21 °C).
Besides, their thicknesses range approximately from 200 to 500 μm.
These bundled conductors are particularly susceptible to wind excited vibrations in the frequency range approximately from 10 to 60 Hz, due to vortex shedding.
According to the report by Brandriss and Margel (1993) the absorbance at approximately 3750 cm−1 and at the range approximately from 3265 to 3645 cm−1 was assigned to free silanol and chemisorption of water through silanol group, respectively.
Network properties do not seem to be especially affected by the GO level, and remain constant over a wide range (approximately from 3 to 14, that covers the range of application of the method) (see Figure 1).
Dust consists of multiple composite particles ranging approximately from 0.1 to 80 μm in diameter.
The lengths of the aforementioned transverse cracks ranged, approximately, from 0.92 to 11 m and became smaller in sections close to the parapet walls.
The inclination of the earth and latitude of the site has affected the trend of the radiation level with values ranging approximately from 34.2 to 37.8 MJ/m2.
The increase in mechanical strength ranged approximately from 72%to81%1% after 3 days and from 86% to 93% after 7 days with respect to the strength at 28 days.
Therefore, both steady and transient tensile coupon tests were conducted at different temperatures ranged approximately from 20 to 1000 °C for obtaining the mechanical properties of cold-formed steel structural material.
