Sentence examples for rail voltage from inspiring English sources

This failure mode occurs during continuous operation at a DC rail voltage, which in practice is well below the breakdown rating (typically half of the breakdown).

With respect to other implementations [4], the proposed system is able to guarantee good performances with a single DC rail voltage.

5- and 7-stage ring oscillator (RO) outputs ranged from ∼120 Hz to >2 kHz with rail voltages, VDD, increasing from −15 V to −90 V.

The supply voltage is only ±0.4 V with a rail-to-rail voltage swing capability and total power consumption of mere 10 μW.

The main features of the proposed conveyor are: design simplicity; rail-to-rail input voltage swing capability at a low supply voltage of ±0.5 V; and ultra-low-power consumption of mere 10 μW.

The experimental result shows near rail-to-rail common mode voltage range.

With this model we examine the problem of the non-linear output characteristics of tunnel FETs, and the related small drain conductance at low drain voltage, which prevents rail-to-rail logic switching, and design a nanowire TFET by an appropriate selection of the material, nanowire size and degeneracy levels in the source and drain regions.

According to the main technical indicators of 25 Hz phase-sensitive track circuit: when there is no train on rails, the effective voltage of the terminal of track coil relay (WXJ-25) shall not be less than 15 V, and when the effective voltage falls to 9 V, the contact of the track relay will fall down.

But what if a trainload of frantic people had been evacuated into a dark tunnel with a high-voltage rail, all because of an elaborately wrapped grapefruit?

Finally, a physical two-dimensional electric field model for the SuperJunction structures is developed which is then imported into Zeller's model to compute the cosmic ray failure rate for different DC voltage rails.

This is achieved with the design of the quiescent operating point in the VCO's output nodes with a value close to the voltage rails, letting the varactors to behave quasi linearly in the achievable VCO tuning range.