Suggestions(5)
Exact(1)
The beam size on the specimen surface was 0.2 × 1 mm, allowing the sub-structure along the radius of the specimen to be characterized.
Similar(59)
For small mutual shifts of grains, the normal to surface component of the rigid-body translation in a direction normal to surface formed by field evaporation, rigid translations is [17] Tn=frac{rho varDelta rho }{r}, (2 where Δρ is the difference between the step radii in adjacent grains and r is the radius of curvature of the specimen.
The relationship between the finite tip radius and compressibility of the specimen is then examined and a composite correction factor that involves both factors, derived.
Limitations imposed by photolithography restricted the minimum radii of curvature of the specimen perforations to one micron.
This results in a strain of ε = 92.1 at a radius of r = 11 mm according to Eq. (1) with the equivalent plastic strain ε, n the number of revolutions, r the radius and t the specimen thickness: (1) ε = 2 π nr t 3 Details concerning the setup of the HPT tool used in this study can be found elsewhere [16].
(3) The worn length of the steel spherical pin specimen on the steel flat specimen becomes close to the initial radius of the curvature of the pin specimen when the sliding distance is large.
Our numerical results exhibit good qualitative comparison with experimental observations and predict characteristic swelling times that are proportional to the square of the specimen radius.
In other words, small radius leads to high plastic deformation and bending direction of the specimen is in accordance with local deformation with small bending radius.
The effective radius (R) for the flat specimen is 2.00 mm and the effective radius for the bumpy specimen is 0.806 mm, the radius of the bump was computed at the peak.
The radius of the neck is found to increase with an increase in the deformation of the specimen and to decrease as the ductility of the material decreases.
Age of the specimen.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com