Sentence examples for radios on the same from inspiring English sources

CDMA allows multiple users to communicate with cell phones, satellites and radios on the same physical channel through the sharing of bandwidth.

Meanwhile Dr Pendry and his colleagues at Hammersmith Hospital in London, along with GEC Marconi, an electronics company, have designed a negative-refractive-index lens for radio waves on the same principles.One practical application of these radio lenses could be to focus the radio waves used in magnetic-resonance imaging (MRI), a form of medical body-scanning.

The MIMO operation mode selection of a radio link is also interdependent with the assigned frequency channel and other scheduled radio transmissions on the same channel.

It allows each mesh router to be equipped with multiple radio interfaces, and it also allows the networks to use multiple channels, so that different radio interfaces on the same node can be tuned to different channels and perform parallel transmissions or transmit and receive simultaneously [7].

After a channel switch, the T radio remains on the same channel until all packets, which are addressed to the same destination node, have been sent or until a maximum period of time has expired [25].

The BBC's Chinese service broadcasts have been regularly jammed since May 1989, at the time of the Tiananmen Square protests, by deliberately broadcasting a strong radio signal on the same frequencies.

This was an important step because, firstly, CMOS was a very inexpensive process, and secondly, integrating both the baseband and the radio function on the same microchip/silicon would make the microchip drastically smaller in size.

As announced on Arctic Monkeys' website, the first single was "Crying Lightning", released on 6 July, digitally through iTunes and also received its first radio premiere on the same day.

In multi-hop configuration, wireless nodes are equipped with multiple radios co-located on the same tower.

Long ago, when radio spectrum was wide open and we weren't able to do very good radios, we decided that the best and cheapest way to allow many radios to operate on the same channel was to divide the spectrum up according to the application.

Ideally, a transmitter operating on a non-overlapping channel with respect to a receiver generates no interference on the receiver, therefore the I-factor for two non-overlapping channels is 0. When the interferer and receiver radios are operating on the same channel, 100% of the interferer signal power at the location of the receiver will pass through the receiver's filter.