Sentence examples for radial injection from inspiring English sources
Furthermore, the performance of airlift pumps with dual injector is improved by synchronizing the injected air at both axial and radial injection ports.
Radial injection rate (m/s).
A SG-100 torch with internal radial injection was used for the spraying.
The Reynolds equation with radial injection, including piezoelectrically controlled jet, describes the non-linear interaction between bearing surface and rotating shaft.
A bidirectional model was thus developed based on the comparison of the direction of the flow front to the fiber orientation during radial injection by defining an entrapment angle.
A theoretical analysis of their origin shows that they are due both to the randomness of the aperture field and to a nonzero local slope of the surface near the injection hole; the corresponding conductivity fluctuation amplitudes have power law and linear variations with the lateral displacement, and are enhanced by the radial injection geometry.
Spark ignition of turbulent nonpremixed bluff-body flames with radial fuel injection for different fuel and air bulk velocities and swirl conditions has been investigated in terms of stability and ignitability limits and ignition probability (Pign, defined as the probability of igniting the whole flame from a localized 2-mm spark).
When the acidizing is performed in a single linear core or in a single radial core, the injection pressure drop decreases monotonically versus the injected pore volume of HCl acid.
# Tone Changes 3 4 5 Error insertion Tone injection Radial symmetric Method I Method II.
Conventional methods to measure in-plane permeability are based on radial or unidirectional injection experiments performed at fixed FVC.
The numerical simulations and experimental results show that the fracture patterns of hydraulic fracturing in clay greatly depends on the size of radial boundary and fluid injection rate, and the fracturing orientation induced by hydraulic fracturing can be controlled by changing the size of radial boundary and fluid injection rate.
