Sentence examples for quantum instruments from inspiring English sources

Eluting compounds were analyzed on either ThermoElectron LTQ or Quantum instruments.

The temperature profiles along the length of heater and specimen are mapped by using an infrared microscope (Quantum Focus Instruments, MWIR-512 InSb IR FPA camera) with 0.1 K temperature and 2 μm spatial resolution.

Electric pulses were applied via a pair of electrode disks (7 mm diameter) rigged on the tips of tweezers (pinsettes-Type electrode 520, Quantum BTX instrument).

The formulation was poured into circular aluminum plate and dried in vacuum oven to form a dry film which was then observed under the scanning electron microscope (FEI, Quantum 200E Instrument).

Field emission scanning electron microscopy (FESEM) using a Quanta 200F instrument (FEI, Hillsboro, OR, USA), was used to capture the images of the evaporated GO and ERGO layers on the graphite sheet.

LC−MS/MS and LC−MS n spectra were recorded on either ThermoElectron Quantum or LTQ instruments.

Magnetization amplitudes (SIRM) were consistent with the remanence measured at different temperatures with Quantum design MPMS instrument, where the SIRM at room temperature corrected for density (500 kg/m3) is near 3 mA/m (see Figure 3).

Chemical state of nitrogen in the Co-PPy-TsOH/C catalysts was acquired on a PHI Quantum 2000 XPS instrument (Chanhassen, MN, USA) using Al K α radiation with a power of 250 W and pass energy of 14 eV.

Sample derivatization (polar metabolites), methylesterification (lipids), and GC-MS measurements were carried out following the procedure previously developed in our group [ 95] on a triple quad (TSQ Quantum GC; Thermo) instrument.

The magnetic characterization of all the samples was carried out by Quantum Design MPMS-XL instrument.

The photon flux density (PFD) of the artificial light was measured by a LI-COR Model Li-250 instrument with quantum sensor (400-700 nm).