Sentence examples for quantity of cutting from inspiring English sources

Therefore, it is required to supply an appropriate quantity of cutting fluid to the grinding gap.

In small quantity cooling lubrication (SQCL) grinding, small quantity of cutting fluid is air-atomized to serve the purpose of cooling and lubrication during the process.

During this process, very small quantity of cutting fluid is applied as a narrow high velocity pulsing jet at the cutting zone.

As the quantity of cutting fluid is very small, some auxiliary cooling of tool using heat pipe was attempted in the present work to enhance heat dissipation and thus improving cutting performance.

The optimized results indicate that minimum quantity lubrication using nanofluid (NFMQL) shows promising results over minimum quantity lubrication technique using conventional cutting fluid in terms of cutting zone temperature, and surface roughness.

To minimise the usage of cutting fluid during hard machining, an indigenously designed and fabricated minimum quantity cutting fluid (MQCF) application system is used.

Minimum quantity lubrication technique (MQL) is an attractive alternative approach to reduce cutting fluids consumption, improve efficiency of cutting fluids at machining zone and use of harmless fluids.

Minimum quantity lubrication machining has been actively researched by scientists as a viable alternative to the use of cutting fluids used in metal cutting, a source known for their operator's health and ecological concerns.

The experimental design focused on studying the effects of cutting mode (conventional/high-speed machining), cutting speed levels for each of the two modes, feed rate, and minimum quantity lubrication on tool life, specific cutting energy, productivity, process cost, and machining forces.

Short history of cutting.

This technique originally had been applied to cutting-stock problem, which consists of cutting a set of available stock lengths to meet customer orders for items in required lengths and quantities with the objective of minimizing the wasted material [18].