Sentence examples for purged dry from inspiring English sources

A Bruker A513 accessory mounted in the same spectrometer is used to obtain bi-conical reflectance with variable incidence angle i and emission angle e between 13° and 85° at room temperature, under purged (dry air, H2O, and CO2 removed) or vacuum conditions, in the 1- to 100-µm spectral range (Maturilli et al. 2014).

Honeybee silk films (each about 5 mg) were encapsulated in vented aluminum pans and heated in a TA Instruments Q100 Differential Scanning Calorimeter (New Castle, DE), with purged dry nitrogen gas flow (50 mL.min−1), and equipped with a refrigerated cooling system.

Samples were manipulated in an N2 purged, dry (<1 ppm H2O) glove box and was characterized by IR, H, C{H}, and Se{H} NMR spectroscopy, with the data in very good agreement with related complexes, and consistent with a distorted cis-octahedral coordination environment.

A three necked flask was flame dried and purged with dry nitrogen gas to eliminate any trace of moisture prior to the addition of the reagents to the flask.

MMA (3.0 g) was added to form an emulsion and the mixture purged with dry N2.

The spectrometer was continuously purged with dry air from a Balston dryer (Balston, MA).

The samples were purged with dry nitrogen at a flow rate of 20 ml/min.

The tested chamber was purged with dry air between each NH3 pulse to allow the film surface to recover.

Fourier transform infrared (FTIR) microspectroscopy was performed on a Continuum microscope with an MCT A detector coupled to a Nicolet 6700 spectrometer purged with dry, CO2-free air.

The analysis chamber was continuously purged with dry air in order to minimise interference of the intrinsic forsterite absorbance band by atmospheric background.

Also, for spectral acquisition at wavelengths greater than 2,500 nm, the monochrometer was purged with dry nitrogen gas in order to reduce a strong absorption feature at 4,300 nm resulting from atmospheric CO2.