Suggestions(1)
Exact(22)
Unknown to the club, the pump was turned off May 7 for maintenance that included replacing the impeller (a propellerlike device that sucks in fresh water) and the ball bearings.
The CH4 pump was turned off when the furnace temperature reached 700 °C.
After the turbo pump was turned on, significant change in the current was observed.
Pirani gauge, a low-level vacuum gauge, provided that the current was decreased at 450 s when the rotary pump was turned on.
At the end of every experiment the pump was turned off and the entry value into the oven (MV2) was closed whilst the exit value (MV2) was opened into a fume hood to allow for slow depressurisation over 45 min.
Then the vacuum pump was turned on, and the system was vacuumed along with the heating temperature of 473 K for 1.5 h (without any loss of crystallinity under the given thermal conditions).
Similar(38)
If the pump is turned on without venting the air and draining the water, the water from the pump would hit the alternating pockets with enough force to blow holes in the piping.
When temperature is within the upper and lower limits, the heat pump is turned off and temperature changes naturally.
The apex of the pump is turned from the 11 o'clock to 2 o'clock position (white arrow).
When the pump is turned off, the pressure immediately drops to the instantaneous shut-in pressure (P isip).
where ( {P}_{hp}^{min} ) and ( {P}_{hp}^{max} ) are the allowed minimum and maximum power when the heat pump is turned on.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com