Your English writing platform
Discover LudwigSuggestions(1)
Exact(58)
When high pump flow rate was used, impregnating solution residence time was short.
The blood pump flow rate should be reduced and convection interrupted when moving the patient.
(Expert opinion) Strong agreement 4.3.2.3 The blood pump flow rate should be reduced and convection interrupted when moving the patient.
In conclusion, the multilevel microporous and nanofibrous composite scaffolds can be obtained by varying pump flow rate of electrospraying.
At low pump flow rate as impregnating solution passed slowly over the catalyst bed, its residence time in impregnation reactor was long.
The pump flow rate is 1.0 mL/min with THF as the carrier solvent, and injection volumes are set to 20 μL.
It is recommended to keep the pump flow rate and perfusion pressure to maintain appropriate uteroplacental blood flow during CPB [9].
At the oxygenator, the sweep gas rate, which conditions the PaCO2 of the patient, should be one to two times the pump flow rate [25].
By increasing pH and decreasing pump flow rate, rate of adsorption was increased and axial non-uniformity in the bed was enhanced.
Similar(2)
For the experiment, three standardized circuits used, each with a roller-pump (flow rate:5 l/min) and a separate reservoir.
An external pump (flow-rate 800 mL min-1) supplied the GC with ambient air, and every 15 min air samples (sampling volume of 2 mL) were automatically injected into the GC system through a 4-port valve regulated by pressurized air: the PAN retention time is 2.35 min whereas the detection limit is 0.001 ppb.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com