Sentence examples for pulsed pumping from inspiring English sources

An important design consideration in pulsed pumping groundwater remediation systems is the pumping schedule adopted to best minimize operational costs for the well grid while still satisfying treatment requirements.

Kahler, DM; Kabala, ZJ, Acceleration of groundwater remediation by deep sweeps and vortex ejections induced by rapidly pulsed pumping, Water Resources Research, vol 52 no. 5 (2016), pp. 3930-3940 [abs1002/2015WR017157] [abs].

Optical losses under pulsed pumping conditions are determined by moving an excitation stripe of fixed length (4 mm) away from the emitting termination of fibers, thus increasing the separation distance D, namely, the length of the unexcited region.

In the pulsed pumping mode of operation, periodic rather than continuous pumping is used.

Pulsed pumping increased the respective aqueous concentrations by a factor of ≈ 6.

Pulsed pumping was not found to increase the amount of mass removed in this study.

For the pulsed pump, the most important factors need to be determined during amplifier design are the pump power (PP) and pump duration (tp).

It has been shown that the probe beam can be completely switched off (i.e. 100% modulation) by a pulsed pump laser beam at 50 kW/cm2.

It is shown that a pulsed pump laser beam at 355 nm switches the transmission of a cw probe laser beam at 633 nm through a Pt:ethynyl sample.

A cw probe laser beam at 640 nm corresponding to the peak absorption of O-state in the bR photocycle is switched by a pulsed pump laser beam at 570 nm corresponding to the maximum initial B state absorption, at relatively low powers.

The transmission of a cw probe laser beam at 410 nm corresponding to the peak absorption of M state through a bR film is switched by a pulsed pump laser beam at 570 nm that corresponds to the maximum initial B state absorption.