Sentence examples for pullout forces from inspiring English sources

Warp yarns showed higher pullout forces than the fill yarns.

For this specimen, the bond strength was the main resisting force against the pullout forces.

Such embedded column bases can develop the required resistance against pullout forces at lower constructional costs.

The cohesive and pullout forces at the interface of G Ep nanocomposites are also investigated.

A tunnel-type anchorage can resist strong pullout forces via the "clamping effect" provided by the surrounding rock.

Ozbolt et al. (2005, 2007) and Ožbolt and Eligehausen 1990 have presented finite element modelling of headed studs under pullout forces.

In the case C3, the resistance of the inclined surface, against the pullout forces, will incorporate both types of bond slip (Rs), and anchoring (Ra), resistances.

Pullout forces developing in dense sand material are found to be significantly higher as compared to the values obtained using closed-form solution.

Since there is no end plate for test M1, therefore, all the pullout forces are resisted by the bond stresses (contact friction).

The pullout forces increased with increasing fabric pre-tension levels and decreased with increasing pull-out speeds.

Experimentally measured pullout forces for stent grafts (SGs) are used in clinical discussions and as reference values in bench studies and computer simulations.